Machine tools

Filters
By popularity
By popularity From expensive From cheap
Turning and milling machine HQ500 JpAuto Industrial combined
Turning and milling machine HQ500 JpAuto Industrial combined
98 800.00 ₴
Special order
Code: 5302
  • * Two 750W motors
  • * 125mm 3-jaw chuck
  • * 28mm through hole in spindle
  • * 500mm Distance between centers
  • * 420mm workpiece diameter above the bed
Turning and milling machine HQ800 JpAuto Industrial combined
Turning and milling machine HQ800 JpAuto Industrial combined
106 000.00 ₴
Special order
Code: 5303
  • * Two 750W motors
  • * 125mm 3-jaw chuck
  • * 28mm through hole in spindle
  • * 800mm Distance between centers
  • * 420mm workpiece diameter above the bed
Milling machine JpAuto Industrial DM46G with gearbox table 1000 mm, DRO and thread cutting
Milling machine JpAuto Industrial DM46G with gearbox table 1000 mm, DRO and thread cutting
125 400.00 ₴
Special order
Code: 5301
  • * Hardened and ground guides
  • * 1500W – engine power
  • * Left/right spindle rotation
  • * Table size 1000x240 mm
  • * 46 mm maximum diameter for drilling holes in steel
  • * 83 mm maximum diameter of end milling
  • * Thread cutting function
  • * 330 kg weight
Milling machine JpAuto Industrial DM46G with gearbox table 1000 mm, DRO and thread cutting
Milling machine JpAuto Industrial DM46G with gearbox table 1000 mm, DRO and thread cutting
114 000.00 ₴
Special order
Code: 5304
  • Equipment WITHOUT DRO
  • * Hardened and ground guides
  • * 1500W – engine power
  • * Left/right spindle rotation
  • * Table size 1000x240 mm
  • * 46 mm maximum diameter for drilling holes in steel
  • * 83 mm maximum diameter of end milling
  • * Thread cutting function
  • * 330 kg weight
Milling machine JpAuto Industrial DM46G with gearbox and threading
Milling machine JpAuto Industrial DM46G with gearbox and threading
104 500.00 ₴
Special order
Code: 5305
  • Equipment WITHOUT DRO
  • * Hardened and ground guides
  • * 1500W – engine power
  • * Left/right spindle rotation
  • * Table size 800x240 mm
  • * 46 mm maximum diameter for drilling holes in steel
  • * 83 mm maximum diameter of end milling
  • * Thread cutting function
  • * 330 kg weight
JpAuto Industrial DM46G milling machine with gearbox, DRO and thread cutting
JpAuto Industrial DM46G milling machine with gearbox, DRO and thread cutting
115 900.00 ₴
Special order
Code: 5306
  • * Hardened and ground guides
  • * 1500W – engine power
  • * Left/right spindle rotation
  • * Table size 800x240 mm
  • * 46 mm maximum diameter for drilling holes in steel
  • * 83 mm maximum diameter of end milling
  • * Thread cutting function
  • * 330 kg weight
Milling machine JpAuto Industrial DM32G with gearbox
-9%
PROMOTION
Milling machine JpAuto Industrial DM32G with gearbox
88 550.00
80 850.00 ₴
In stock
Code: 5300
  • * Hardened and ground guides
  • * Table size 700x190 mm.
  • * 32 mm maximum drilling diameter in steel
  • * 63 mm maximum diameter of end milling
  • * 230 kg Gross weight
  • *Package size 74x72x108 cm
Screw-cutting lathe JPAuto Industrial GX250S 250x500 750W
-4%
PROMOTION
Screw-cutting lathe JPAuto Industrial GX250S 250x500 750W
77 000.00
74 100.00 ₴
In stock
Code: 5294
  • Model: GX250
  • Lead screw protection already installed
  • Hardened and ground bed guides
  • Hardened spindle (DIN 6350)
  • Power supply: 1 phase, 220 V (AC) / 50 Hz (optional 380 V)
  • Electric motor power: 0.75 kW
  • Maximum diameter of workpiece processed over the bed: 250 mm
  • Distance between two centers: 500mm
  • Spindle hole diameter: 26 mm
  • Bed material: cast iron
  • Overall dimensions of the machine: 1150x500x470 mm
  • Weight: 160/180 kg
Screw-cutting lathe JPAuto Industrial GX250L 250x700 750W
-17%
PROMOTION
Screw-cutting lathe JPAuto Industrial GX250L 250x700 750W
83 850.00
69 500.00 ₴
In stock
Code: 5295
  • Model: GX250
  • Lead screw protection already installed
  • Hardened and ground bed guides
  • Hardened spindle (DIN 6350)
  • Power supply: 1 phase, 220 V (AC) / 50 Hz (optional 380 V)
  • Electric motor power: 0.75 kW
  • Maximum diameter of workpiece processed over the bed: 250 mm
  • Distance between two centers: 700mm
  • Spindle hole diameter: 26 mm
  • Bed material: cast iron
  • Overall dimensions of the machine: 1350x500x470 mm
  • Weight: 180/200 kg
Screw-cutting lathe JPAuto Industrial GX280L 280x750 1100W
-7%
Screw-cutting lathe JPAuto Industrial GX280L 280x750 1100W
121 200.00
113 100.00 ₴
In stock
Code: 5296
  • Model: GX280
  • Lead screw protection already installed
  • Hardened and ground bed guides
  • Hardened spindle (DIN 6350)
  • Power supply: 1 phase, 220 V (AC) / 50 Hz (optional 380 V)
  • Electric motor power: 1.1 kW
  • Maximum diameter of workpiece processed over the bed: 280 mm
  • Distance between two centers: 750 mm
  • Spindle hole diameter: 38mm
  • Bed material: cast iron
  • Weight: 290/350 kg
Screw-cutting lathe JPAuto Industrial GX280S 280x500 1100W
Screw-cutting lathe JPAuto Industrial GX280S 280x500 1100W
107 800.00 ₴
Not available
Code: 5297
  • Model: GX280
  • Lead screw protection already installed
  • Hardened and ground bed guides
  • Hardened spindle (DIN 6350)
  • Power supply: 1 phase, 220 V (AC) / 50 Hz (optional 380 V)
  • Electric motor power: 1.1 kW
  • Maximum diameter of workpiece processed over the bed: 280 mm
  • Distance between two centers: 500 mm
  • Spindle hole diameter: 38mm
  • Bed material: cast iron
  • Weight: 260/320 kg
Screw-cutting lathe JPAuto IndustrialGX320 320x500 1100W
Screw-cutting lathe JPAuto IndustrialGX320 320x500 1100W
127 300.00 ₴
Delivering
Code: 5298
  • Model: GX320
  • Lead screw protection already installed
  • Hardened and ground bed guides
  • Hardened spindle (DIN 6350)
  • Power supply: 1 phase, 220 V (AC) / 50 Hz (optional 380 V)
  • Electric motor power: 1.1 kW
  • Maximum diameter of workpiece processed over the bed: 320 mm
  • Distance between two centers: 500mm
  • Spindle hole diameter: 38mm
  • Bed material: cast iron
  • Weight: 320/360 kg
Screw-cutting lathe JPAuto Industrial GX360L-PRO 360x750 1500W
Screw-cutting lathe JPAuto Industrial GX360L-PRO 360x750 1500W
145 800.00 ₴
Delivering
Code: 5319
  • Model: GX360L-PRO
  • Lead screw protection already installed
  • Hardened and ground bed guides
  • Hardened spindle (DIN 6350)
  • Power supply: 1 phase, 220 V (AC) / 50 Hz (optional 380 V)
  • Electric motor power: 1.5 kW
  • Maximum diameter of workpiece processed over the bed: 360 mm
  • Distance between two centers: 750 mm
  • Spindle hole diameter: 38mm
  • Bed material: cast iron
  • Weight: 370/400 kg
Screw-cutting lathe JPAuto Industrial GX360VL-PRO 360x750 1500W
Screw-cutting lathe JPAuto Industrial GX360VL-PRO 360x750 1500W
162 000.00 ₴
Delivering
Code: 5320
  • Model: GX360VL-PRO
  • Lead screw protection already installed
  • Hardened and ground bed guides
  • Hardened spindle (DIN 6350)
  • Power supply: 1 phase, 220 V (AC) / 50 Hz (optional 380 V)
  • Electric motor power: 1.5 kW
  • Maximum diameter of workpiece processed over the bed: 360 mm
  • Distance between two centers: 750 mm
  • Spindle hole diameter: 52mm
  • Bed material: cast iron
  • Weight: 390/420 kg
Screw-cutting lathe JPAuto Industrial GX320M-PRO 320x600 1100W
Screw-cutting lathe JPAuto Industrial GX320M-PRO 320x600 1100W
125 500.00 ₴
Delivering
Code: 5321
  • Model: GX320M-PRO
  • Lead screw protection already installed
  • Hardened and ground bed guides
  • Hardened spindle (DIN 6350)
  • Power supply: 1 phase, 220 V (AC) / 50 Hz (optional 380 V)
  • Electric motor power: 1.1 kW
  • Maximum diameter of workpiece processed over the bed: 320 mm
  • Distance between two centers: 600mm
  • Spindle hole diameter: 38mm
  • Bed material: cast iron
  • Weight: 350/390 kg
Screw-cutting lathe JPAuto Industrial GX250VS 250x500 750W
-9%
Screw-cutting lathe JPAuto Industrial GX250VS 250x500 750W
84 530.00
77 000.00 ₴
Special order
Code: 5322
  • Model: GX250VS
  • Lead screw protection already installed
  • Hardened and ground bed guides
  • Hardened spindle (DIN 6350)
  • Power supply: 1 phase, 220 V (AC) / 50 Hz (optional 380 V)
  • Electric motor power: 0.75 kW
  • Maximum diameter of workpiece processed over the bed: 250 mm
  • Distance between two centers: 500mm
  • Spindle hole diameter: 26 mm
  • Bed material: cast iron
  • Overall dimensions of the machine: 1150x500x470 mm
  • Weight: 160/180 kg
Screw-cutting lathe JPAuto Industrial GX250VL 250x700 750W
-8%
Screw-cutting lathe JPAuto Industrial GX250VL 250x700 750W
88 085.00
80 975.00 ₴
In stock
Code: 5323
  • Model: GX250VL
  • Lead screw protection already installed
  • Hardened and ground bed guides
  • Hardened spindle (DIN 6350)
  • Power supply: 1 phase, 220 V (AC) / 50 Hz (optional 380 V)
  • Electric motor power: 0.75 kW
  • Maximum diameter of workpiece processed over the bed: 250 mm
  • Distance between two centers: 700mm
  • Spindle hole diameter: 26 mm
  • Bed material: cast iron
  • Overall dimensions of the machine: 1350x500x470 mm
  • Weight: 180/200 kg