NOCO Genius 5 Battery Charger

Specifications

What is in the box:

GENIUS5 charger with replaceable connector

Integrated Eye Clamps (M10)

Mounting bracket with strap

(2) Self-tapping screws

User Guide and Warranty Information

Operational requirements:

Voltage: 120 V to 240 V AC

Frequency: 50Hz to 60Hz

Operating Temperature: -4° to 104° F (-20° to 40° C)

Storage Temperature: -22° to 140° F (-30° to 60° C)

Relative Humidity: 0 to 95% non-condensing.

Charger:

Current: DC 5A

Voltages: 6 V, 12 V

Types: acid, gel, MF, CA, EFB, AGM, lithium

Power range: up to 120 amp-hours

Consumption: 750W (max)

Efficiency: 87% (120 VAC / 230 VAC)

Protection:

Short circuit: Yes

Open Circuit: Yes

Overheat: Yes

Overpayment: Yes

Intrinsic safety: Yes

Reverse polarity: Yes

Height: 2.91 inches (74.0 mm)

Width: 4.61 inches (117.0 mm)

Depth: 1.93 inches (49.0 mm)

Weight: 1.5 lb (0.68 kg)

Cord management

DC cable + clamp length: 77 inches (195 cm)

DC Cable Size: 16 AWG

DC Fuse Size: MINI® 10A Fuse

AC cable length: 71.7 inches (182 cm)

AC Cable Size: 18 AWG

Resistant to oils, gases, grease, water, chemicals, UV radiation, abrasion

IP rating IP65

                                                              Improved starting voltage sensor. A completely new power mode.

An all-new crank voltage sensor allows GENIUS to detect and charge discharged batteries as low as 1V. For very discharged batteries below 1V, manually enable Force mode to detect and charge batteries to 0V.

More accurate charging in any climate.

A new built-in thermal sensor automatically monitors and adjusts the charging cycle based on ambient temperature fluctuations, limiting the likelihood of undercharging or overcharging, ensuring the battery is charged more accurately and completely. Prevents undercharging in cold weather down to -20C and avoids overcharging in hot weather up to +40C.

Automatic detection. Auto repair. Improved performance.

GENIUS5 automatically detects sulfation/acid delamination. If anything is detected, GENIUS5 will automatically repair and repair damage to the battery, extending battery life and improving performance.

Improved clamping range. Improved clamping force.

Genius clamps have pointed profiles for small terminals and removable built-in eyes for permanently attaching the accessory to the battery. Designed for installation on battery terminals of any shape and size. Designed for improved clamping range, clamping force and higher conductivity.