NOCO Genius 1 Battery Charger

Technical Specifications

What's In The Box

GENIUS1 Battery Charger w/ Interchangeable Connector

Clamps w/ Integrated Eyelets (M6)

User Guide & Warranty Information

Operating Requirements

Line Voltage: 120V to 240V AC

Frequency: 50Hz to 60Hz

Operating Temperature: -4° to 104° F (-20° to 40° C)

Storage Temperature: -22° to 140° F (-30° to 60° C)

Relative Humidity: 0 to 95% Non-Condensing

Charging

Current: 1 Amp DC

Voltages: 6V, 12V

Chemistry: Lead-Acid and Lithium

Types: Wet, Gel, MF, CA, EFB, AGM, Lithium

Capacity Range: Up to 30 Amp-Hours

Maintenance: All Battery Sizes

Power

Consumption: 15 Watts (Max)

Efficiency: 85% (120VAC) / 83% (230VAC)

Safety

Short-Circuit: Yes

Open-Circuit: Yes

Overheating: Yes

Overcharge: Yes

Spark-Proof: Yes

Reverse Polarity: Yes

Product Size

Height: 3.62 Inches (92.0 mm)

Width: 2.32 Inches (59.0 mm)

Depth: 1.26 Inches (32.0 mm)

Weight: 0.77 lbs (0.35 kg)

Cord Management

DC Cable + Clamp Length: 106 Inches (269cm)

DC Cable Size: 18 AWG

DC Fuse Size: 2 AMP MINI® Blade Fuse

AC Cable Length: None

AC Cable Size: None

Oil, gas, grease, water, chemical, UV, abrasion resistant

IP Rating IP60

                                                         Improved starting voltage sensor. A completely new power mode.

An all-new crank voltage sensor allows GENIUS to detect and charge discharged batteries as low as 1V. For very discharged batteries below 1V, manually enable Force mode to detect and charge batteries to 0V.

More accurate charging in any climate.

A new built-in thermal sensor automatically monitors and adjusts the charging cycle based on ambient temperature fluctuations, limiting the likelihood of undercharging or overcharging, ensuring the battery is charged more accurately and completely. Prevents undercharging in cold weather down to -20C and avoids overcharging in hot weather up to +40C.

Automatic detection. Auto repair. Improved performance.

GENIUS1 automatically detects sulfation/acid delamination. If anything is detected, GENIUS1 will automatically repair and repair damage to the battery, extending battery life and improving performance.

Improved clamping range. Improved clamping force.

Genius clamps have pointed profiles for small terminals and removable built-in eyes for permanently attaching the accessory to the battery. Designed for installation on battery terminals of any shape and size. Designed for improved clamping range, clamping force and higher conductivity.