Precision machine vice QHK100 inclined rotary QHK100 type 3422

Vice QHK100

QHK100 is a machine-made precision two-rotary (inclined rotary) vice of the QHK series with a width of jaw pads of 100 mm and a maximum opening of 90 mm, which are used for precise and reliable clamping of a part in a convenient position when processing on milling, drilling, sharpening, grinding and other machines. The range of rotation of the workpiece on the vice of this model in the horizontal plane is 0-360?, in the vertical plane 0-90?. Degree scales allow you to track the angles of rotation and tilt. Structurally, the tool is a body with a pair of parallel jaws, one of which is stationary, and the second is pressed to the part using a trapezoidal screw. The latter, in turn, has protection against the ingress of sawdust (this solution can significantly extend its service life). A thrust bearing mounted on the shaft allows you to create a large clamping force without much effort in rotating the handle. The sliding of the movable jaw is adjusted using adjustment bars. The pads on the jaws are removable, which reduces the cost of servicing the product as a whole, and also increases operating efficiency. The base of the vise has mounting holes and grooves for precise positioning and secure attachment of the fixture to the machine table. If necessary, the vice can be used without a rotating base. The QHK100 is ideal for clamping parts for both roughing and finishing.

Attention!

• During operation, make sure that the vice is not subjected to shock, otherwise the accuracy of the product may be impaired.

• To ensure smooth and accurate operation of the vice, it is necessary to regularly lubricate the moving parts of the device

• When replacing pads, mechanical processing of their working surfaces together with a vice is necessary to obtain the accuracy parameters specified in the technical documentation