Precision machine vice QM16100N rigid-fixing

Code: 5370
4 050.00 ₴ 4 250.00 -5%
In stock
Buy
Ширина губок
100 mm
160 mm
Delivery
  • Новая почта
    From 100 UAH
Payment
Payment to the bank account of the individual entrepreneur.
For registered clients, the account is indicated in your personal account.
In case of a quick order, you will be contacted to clarify all the details.
Description

QM16100N is a precision machine-made rigid-fixing non-rotating vice of the QM16N series with a width of jaw pads of 100 mm and a maximum opening (in the standard position of the pads) of 100 mm, which are used for precise and reliable clamping of parts during processing on milling, drilling, grinding and other machines.

Structurally, the tool consists of a pair of parallel jaws, one of which is stationary, and the second is pressed to the part using a trapezoidal screw.

The smooth running of the latter is ensured by a needle bearing. This solution allows you to obtain maximum clamping force without much difficulty in turning the handle. The backlash of the movable jaw is adjusted using an adjusting screw located on the back of its body.The pads (plates) on the jaws are removable, which reduces the cost of servicing the product as a whole, and also increases operating efficiency. The base of the vise is equipped with mounting holes and grooves to securely and accurately mount the fixture to the machine table. If necessary, the holes can be used for installing a rotating mechanism (not included in the delivery package).

Attention!

  • During operation, make sure that the vice is not subjected to shock, otherwise the accuracy of the product may be impaired.
  • To ensure smooth and accurate operation of the vice, it is necessary to regularly lubricate the moving parts of the device

Working principle of QM series vice:

When horizontal working pressure (clamp) occurs on the vice, a special element located in the middle of the movable jaw increases the clamping force of the workpiece against the body. This allows the vice to avoid extruding the part while maintaining the shape of its surface.

Features:

  • High quality product
  • High clamping accuracy
  • High clamping force
  • The movable sponge is strengthened by an enlarged body
  • Polished surface of rails
  • Interchangeable pads on the jaws (four options for the placement of pads for clamping parts)
  • The surface of the pads is hardened and polished
  • A trapezoidal screw with a large pitch and high torque
  • The presence of grooves for precise installation on the desktop of the machine
  • The possibility of installing a rotating stand
  • Maintaining high accuracy when working in vertical, horizontal and lateral positions
  • Ease of operation

General characteristics

Series:QM

Model: QM16100N

Width of jaw pads: 100 mm

Height of jaw pads: 32 mm

Maximum vise opening (standard pad arrangement): 100 mm

Clamping force: 19 kN

Presence of a rotating mechanism: no

Material: High strength cast iron

Gross weight: 12 kg

Characteristics
Ширина "губок"
100 mm
Type
Rigid-locking
Rotary
No
Series
QM16N